Hawk 250 Aftermarket Exhaust

I would recommend any hawk 250 owner to get this hawk 250 aftermarket exhaust for their bike. When it comes to the hawk 250 any extra power is a good thing and this exhaust sounds much meaner and you will notice a difference right away when you go for your first ride. It was a really quick swap from the stock exhaust to the new aftermarket hawk 250 exhaust. The only issue is that the flange bolt holes on the new exhaust are too small and not aligned the same as the stock hawk 250 exhaust. Using the correct drill bit will make your install much quicker and less painful.

  1. Color: Titanium
  2. Price for a complete muffler exhaust system.
  3. Price for a complete muffler exhaust system.
  4. Pipe is made of 304 Stainless steel material,Muffler is Made of 6061-T6 Aluminum
  5. Installation accessories and hardware as pictures are included.
  6. Easy to install.

Hawk 250

Click on any of the images below to buy the hawk 250 exhaust from amazon. If you use my link below to purchase it from amazon, I will get a small commission from your purchase, it helps keep the website going and getting parts for my hawks. I appreciate you using my links and if you have any questions about this exhaust, email me and I will do my best to help you out.

 

Hawk 250 Full Exhausthawk 250 exhaust

Hawk 250 Full Aftermarket Exhaust

Here are some pictures from my install of the hawk 250 aftermarket exhaust. If you purchase this exhaust for your hawk 250 enduro dirt bike, please post a comment below and let me know how its working for you.  I would also recommend swapping out your hawk 250 carburetor and replacing your jets with a 110 or 115 jet for your hawk 250, click here to read my post on the Mikuni hawk 250 carburetor. If you have over 1000 miles on your hawk 250, then you should also be checking your valves and making sure they are set correctly. You can find a video done by MotoCheez on how to check your valves, I have posted his guide on this website.

 

Hawk 250 Exhaust
You see below how I got the holes drilled out on the flange that connects to the hawk 250 header. It wasn’t pretty but it got the job done. I’m sure there are better ways to do it. I’m not a mechanic, I just make it happen the best way I can lol.
Hawk 250 Exhaust

Hawk 250 Exhaust

Hawk 250 Exhaust

Hawk 250 Exhaust

Hawk 250 Exhaust

My hawk 250 upgrades, I have new sprockets, carb with new jets, new hawk 250 exhaust, new chain and digital cluster. If you are looking to buy the upgrades I have, you can purchase them from my shop, click here for hawk 250 upgrades

Facebook Hawk 250 Comments

7 thoughts on “Hawk 250 Aftermarket Exhaust

  • Hey just curious did you make bracket holding exhaust end on or purchace it? Also did have any issue with melting air box. I wrapped my entire exhaust in heat wrap still little hot only little warping. This is why need bracket to lower pipe little so not touching air box.

    • I used a bracket I got from homedepot for about a dollar. I didn’t wrap my exhaust pipe. I have a small gap between the air box and the pipe, no issues with melting the air box with my current setup.

      • Thanks ended up doing same, found old door hinge with too holes and just made them bigger. Worked out pretty good. So now have the same kind of gap. Thanks for reply tho.

        • Cool, that should work good for you. I did the same setup on 3 other hawks for my buddies and they have no issues with the air box melting. Are you enjoying the hawk so far? Mine is about 2600 miles and now its getting colder in New York, so I need some better gear to keep on riding.

      • Its not really that much louder than the stock exhaust. It just sounds more deeper and meaner. I like it a lot =). I might have some of these for sale next week. Email me at webmaster @ hawk250.com if you want one.

Leave a Reply